| |
Packaging:
Packaged in 22.5 litre pails (5 gal.).
Coverage:
DUR-A-SEAL A50 should be applied in two coats. Typical spreading rates
are as follows:
Smooth dense concrete: 3.7-4.5 m2/iltre (151-183 ft2/gal.).
Gunite surfaces, porous block or brick: 1.7-3.1 m2/litre (69-126 ft2/gal.).
ACTUAL COVERAGE WILL VARY DEPENDING ON THE POROSITY AND COMPOSITION OF
THE SUBSTRATE(S).A TEST SAMPLE SHOULD BE APPLIED TO ESTABLISH PRACTICAL
COVERAGE ON THE ACTUAL SUBSTRATE
Appliction:
Brushes, rollers, or spray
|
 |
Pigmented 50% Solids Solvent Based Coating
Product Description:
DUR-A-SEAL A50 is a pigmented one component acrylic copolymer based
on methacrylate resins.
Uses:
DUR-A-SEAL A50 effectively seals brick, block and concrete against the
ingress of water. It also has superior chloride screening capabilities
which make it ideally suited to protect all but the high traffic areas
of concrete structures such as parking garages and bridges. Pigmented
coatings are extremely resistant to weathering effects.
DUR-A-SEAL A50 provides durable protection of concrete balconies, exterior
walls, exterior of water towers and any concrete or masonry structure
where uniform colour and easy clean surfaces are required. DUR-A-SEAL
A50 will allow the structure to breathe, a feature which is essential
on heated buildings and on structures in contact with earth or water.
It can be readily re-coated, after cleaning, should damage occur.
|
| |
Download
More Information |
| |
|
|
