| |
Packaging:
FLEX-SEAL RED PRIMER is supplied in 19 L (4.2 gal.) re-sealable pails.
Coverage:
Coverage rate will vary due to texture and porosity of the substrate,
and to a slight degree due to temperature. Apply FLEX-SEAL RED PRIMER
at a rate of between 6-8 m2/L (290-405 ft2/gal.) or 114-152 m2 (1218-1700
ft2)/pail.
Application:
Brush or Roller
|
 |
Synthetic Rubber Based Primer
Product Description:
FLEX-SEAL RED PRIMER is a fast drying, rubber based, resin cutback
primer specially formulated to provide good initial adhesion, and more
importantly, excellent permanent adhesion of Flex-Seal Air/Vapour Barrier
Membranes. FLEX-SEAL RED PRIMER is red in colour and remains “tacky”
after drying.
Uses:
FLEX-SEAL RED PRIMER is designed to pre-treat all substrates prior
to installation of Flex-Seal Air/Vapour Barrier Membranes and is suitable
for use over most common construction materials, including; masonry, concrete,
wood, metal and gypsum sheathing. Note that FLEX-SEAL RED PRIMER is intended
for exterior use only. For information on applications of Flex-Seal Air/Vapour
Barrier Membranes please consult your Durabond representative.
|
| |
Download
More Information |
| |
|
|
